Product Details:
Minimum Order Quantity | 10 Piece |
Type | Overvoltage Relay, Undervoltage relay |
Brand | NOVATEK ELECTRO |
Voltage Type | AC |
Voltage (V) | 220 - 240V AC |
Number of Poles | 2 Pole |
Current (Amps) | 10A - 16A direct and any current through contactors |
Application | Single Phase Voltage Monitoring |
Contact Form | SPDT |
Accuracy | +- 3V |
Ambient Temperature | from -35 to + 55 DegreeC |
Approval | CE |
Max. Switching Voltage | 300V AC |
Country of Origin | Made in India |
RN-118/RN-119 is designed to disconnect the household and industrial single-phase load in case of unacceptable voltage fluctuations in the mains, and then automatically turn on after restoration of the mains parameters.
In case of load power of up to 2.3 kW (current is up to 10A) for RN-118 or load power of up to 3.6 kW (current is up to 16A) for RN-119, the disconnection is done directly by the device the output contacts of which are included in power supply load outage.
In case of higher power, the disconnection is done by the magnetic contactor of the appropriate power, the output contacts of the device are connected to the coil power supply for circuit disconnection (MC is not included in the delivery set).
RN-118/RN-119 detects the maximum and minimum voltage values from the moment the power supply voltage is applied to the device or since the last time the stored values were viewed.
RN-118/RN-119 indicates the actual value (true RMS) of the input voltage and the state of the output relay contacts.
The device can be operated in four independent modes:
- Over and Under Voltage Relay;
- Over Voltage Relay;
- Under Voltage Relay;
- ON Delay Relay.
Additional Information:
Product Details:
Minimum Order Quantity | 5 Piece |
Usage/Application | Over-Under Voltage Protection |
Model Name/Number | RN-116 |
Brand | NOVATEK ELECTRO |
Voltage (V) | 220 - 240V |
Voltage Type | AC |
Current (Amps) | upto 16A |
Number of Poles | 2 Pole |
Application | Industrial/Domestic appliance protection |
Type | Voltage Relays |
Contact Form | SPDT |
Display | LED display |
Ce Certified | CE |
Country of Origin | Made in India |
Voltage Relay RN-116 is designed for turning off the 220 V, 50 Hz residential and industrial single phase load with power of up to 3.5 kW (up to 16 A) at unallowable circuit voltage fluctuation with automatic reset (hereinafter referred to as AR) after circuit parameter recovery.
RN-116 indicates actual input voltage value, fault condition and output relay condition.
Documentation for this device
Additional Information:
Product Details:
Minimum Order Quantity | 3 Piece |
Brand | NOVATEK ELECTRO |
Type | Under & Over Voltage Relay |
Voltage Type | AC |
Voltage (V) | 220 - 240V AC |
Number of Poles | 2 Pole |
Current (Amps) | 32A direct and any current through contactors |
Application | Single phase voltage monitoring |
Contact Form | SPDT |
Accuracy | +- 3V |
Ambient Temperature | from -35 to + 55 DegreeC |
Approval | CE |
Max. Switching Voltage | 300V AC |
Country of Origin | Made in India |
The device front panel features load status indicator (on/off) and three-digit, seven-segment display, which displays (depending on the device status):
The variable pot knobs on the front panel allow for setting:
The RN-102 equipment includes a surge protector which protects the switched load against high frequency and high voltage impulse interference.
Documentation for this device
Additional Information:
Product Details:
Minimum Order Quantity | 5 Piece |
Brand | NOVATEK ELECTRO |
Type | Overvoltage Relay |
Voltage Type | AC |
Voltage (V) | 160 - 280 V |
Number of Poles | 2 Pole |
Current (Amps) | 16A @ 250 V AC Max (upto 3.5 kW) direct and any current through contactors |
Application | Industrial & domestic equipment/load protection, Neutral break protection |
Contact Form | SPDT |
Accuracy | +- 3V |
Ambient Temperature | from -35 to + 55 DegreeC |
Approval | CE |
Max. Switching Voltage | 300V AC |
Country of Origin | Made in India |
The RN-111M voltage monitoring relay is designed to de-energize an industrial/appliance single-phase 220 - 240V/50Hz load in case of inadmissible voltage variations in the mains with subsequent automatic re-energizing after the circuit parameters recovery. Load is connected to the relay either directly via relay terminals or through a magnetic starter, depending on the wattage.
The relay can operate in four independent modes:
The device front panel features load status indicator (on/off) and three-digit, seven-segment display, which displays (depending on the device status):
The variable pot knobs on the front panel allow for setting:
Additional Information:
Product Details:
Minimum Order Quantity | 5 Piece |
Brand | NOVATEK ELECTRO |
Voltage (V) | 220 - 240V |
Voltage Type | AC |
Current (Amps) | 32A direct and any current through contactors |
Number of Poles | 2 Pole |
Type | Industrial Relay, Voltage Relays |
Application | Single Phase Voltage Monitoring Relay |
Contact Form | SPDT |
Display | LED display |
Ce Certified | CE |
Country of Origin | Made in India |
The RN-113 voltage monitoring relay is designed to de-energize an industrial/appliance single-phase 220V/50Hz load in case of inadmissible voltage variations in the mains with subsequent automatic re-energizing after the circuit parameters recovery. Load is connected to the relay either directly via relay terminals or through a magnetic starter, depending on the wattage.
The relay can operate in four independent modes:
The device front panel features load status indicator (on/off) and three-digit, seven-segment display, which displays (depending on the device status):
The variable pot knobs on the front panel allow for setting:
Documentation for this device
Additional Information:
Product Details:
Minimum Order Quantity | 5 Piece |
Type | Overvoltage Relay, Undervoltage relay |
Current | max 16A |
Brand | NOVATEK ELECTRO |
Voltage Type | AC |
Voltage (V) | 220 - 240V |
Number of Poles | 2 Pole |
Current (Amps) | upto 16A (3.5kW) |
Application | Industrial/Domestic appliance protection (AC, TV, Fridge, Washing Machine, Computers, etc.) |
Contact Form | SPDT |
Accuracy | +- 3V |
Ambient Temperature | from -35 to + 55 DegreeC |
Approval | CE |
Max. Switching Voltage | 300V AC |
Country of Origin | Made in India |
The RN-101M voltage monitoring relay is designed to de-energize an industrial/appliance single phase 230V/50Hz load in case of inadmissible voltage variations in the mains with subsequent automatic re-energizing after the circuit parameters recovery.
Besides, the relay:
The device front panel features load status indicator (on/off) and three-digit, seven-segment display, which displays (depending on the device status):
The variable pot knobs on the front panel allow for setting:
Documentation for this device
Additional Information: